舰空导弹武器系统软件靶场综合测试分析

针对舰空导弹武器系统的特点以及舰空导弹武器系统软件定型试验的现状,指出了舰空导弹武器系统软件靶场测试的必要性、特殊性。通过靶场软件测试综合试验,总结了舰空导弹武器系统软件靶场定型的试验方法。并指出了靶场软件测试的发展方向。     

爆炸复合接头剪切强度测试方法研究

参照正交各向异性层压复合板层间剪切强度的测试方法,提出了用于测试爆炸复合接头复合界面剪切强度的3种方法;并建立三维有限元模型,分别对3种测试方法进行模拟;最后分别对3种方法进行了测试试验.结果表明,3种试验方法均能有效测试爆炸复合接头的剪切强度,其中对称试件双切口拉伸法最适合实际应用.     

陶瓷/金属梯度热障涂层的制备及性能评价

为了评价陶瓷/金属梯度热障涂层的性能,设计了4种涂层方案和2种基体材料(1Cr18Ni9Ti和2Cr13).利用单枪单送粉器成功地制备了线性梯度涂层.通过观察涂层的微观结构、测量涂层的抗热震性能和热残余应力来评价涂层的性能.利用扫描电镜对各种陶瓷涂层的微观结构进行了观察和分析,利用X射线能谱分析得到了陶瓷梯度涂层试样中的不同区域的衍射图.热震试验表明,梯度涂层比非梯度涂层具有更好的抗热震性能.采用钻孔法对不同涂层方案进行了残余应力的测量,结果表明,压应力出现在1Cr18Ni9Ti基体材料上,而拉应力出现在2Cr13基体材料上.     

基于EMD的改进小波阈值降噪法在超声信号处理中的应用

针对超声检测回波信号中的大量噪声,分析了超声检测回波信号的特性,考虑经验模式分解（EMD）和小波哗噪的优点,在改进阈值函数基础上提出一种基于EMD的小波阈值降噪方法．该方法利用EMD对超声信号进行分解,对高频分量用改进小波阈值函数方法进行处理,再结合低频分量重构得到降噪信号．仿真实验结果表明,该方法降噪效果优于小波软、硬阂值降噪,进一步提高了重建信号的信噪比,降低了其均方根误差,是一种可行的超声信号降噪方法．     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

基于信息流的中枢疲劳脑电分析

为充分利用多导脑电信息,首次提出运用有向传递函数（DTF）方法,对不同中枢疲劳状态下导联间信息流的强度和方向的变化进行分析。研究结果表明,脑电功能耦合中额一到一顶方向的信息流是大脑皮层联系的一个固有特征,可以有效地刻画安静清醒和疲劳两个状态,长时间脑力劳动任务引起中枢疲劳的增加,进而导致整个频率段占优势的信息流的方向发生了反转,信息流占优势的方向从实验前的顶一到一额方向,转变为实验后的额一到一顶方向。     

Theoretical study of an energetic material di-1H-1,3,4-triazole derivatives

Computations by density functional theory (DFT) method are performed on a series of di-1H-1,3,4-triazole derivatives with different substituents and linkages. The heat of formation (HOF) is predicted by the designed isodesmic reactions. The predicted results reveal that –N₃ and –NN– groups are effective structural units for increasing the HOF values of the di-1H-1,3,4-triazole derivatives. The HOMO–LUMO gap is affected by the substituents and linkage groups. Detonation performance is evaluated using the Kamlet–Jacobs approach based on the calculated density and HOF. The results indicate that –NO₂, –NF₂, –NH–, –NH–NH– and –NN– groups are helpful for enhancing the detonation properties of di-1H-1,3,4-triazole derivatives. The bond dissociation energy and bond order of the weakest bonds are analyzed to investigate their stability. It is observed that the –CH₂–, –CH₂–CH₂– and –CHCH– groups are effective structural units for improving the stabilities of these derivatives. Considering the detonation performance and the stability, five compounds are screened as the potential candidates for high energy density materials.     

目标识别中的传感器管理方法

基于假设检验的方法,研究了目标识别中的传感器管理方法。分别以用于假设检验问题中的最大后验概率、最小代价函数和最大正确检测概率为目标函数,给出了用于目标识别问题的多传感器管理方法,并针对目标识别问题的特点,对其进行了相应的改进。通过对一定场景的仿真,比较了三种不同方法的识别正确率和平均采样次数,分析了各种方法的特点。     

航空电子总线测试系统的设计与实现

现代航空电子综合化系统通常建立在M IL-STD-1533B多路传输数据总线通信网络基础之上,总线控制器(BC)和各个远程终端(RT)必须满足M IL-STD-1553B规定的各项协议指标要求,才能正确地联网通讯。讨论了某型航空电子总线测试系统的设计与实现,主要探讨了此系统的软、硬件开发,系统组成及其BC和RT有效性测试的主要内容和要求。在实际应用中收到了很好的效果。     

某型枪弹火药性能对内弹道性能影响试验研究

通过对某型枪弹 (如经过技术处理的正常弹、减量弹、加温弹、干燥弹及受潮弹 )初速和最大膛压的测定 ,得出火药的药量、初温及挥发份对内弹道性能 (如膛压、初速 )有较大影响 ,因此 ,必须严格控制弹药的储存条件及装药量。